| Customization: | Available |
|---|---|
| Length: | 12m |
| Standard: | GB |
|
Still deciding? Get samples of US$ 0.1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Strength Screw Thread Bar
Handan Yidao Metal products co.,ltd, located in Handan city, Hebei Province, China.
High Strength Screw Thread Bar
Handan Yidao Metal products co.,ltd, located in Handan city, Hebei Province, China.
There are two large steel mills and thousands of fasteners factories.
We have experience in exporting thread bars to over 35 countries around the world.
Handan Yidao metal products CO.LTD is a hot rolled screw thread bar manufacturer which can serve
(diameter from 15mm to 50mm,grade PSB830, PSB930, PSB1080)and all related
accessories(anchor hex nut, bearing plate, domed nut, and coupler).
In addition, handan yidao could produce fasteners such as bolts, nuts, screw rod and steel plates.
Our factory sells 3000MT thread bar and fasteners each month.
Tie rods/ Thread bars are used for soil nailing, formwork tie, tie back, tie
rod, scoffolding, post tensioning system, geotechnical, mining and tunneling, etc.
We have launched new product D15/17 TIE ROD (diameter 15mm, yield strength>830MPA, tensile strength>1030MPA) for customers.
The length of the finished thread reinforcement is usually 9 m and 12 m.
the THREAD BAR diameter is from 15MM to 50MM
The grade of yield strength/ tensile strength/ post-fracture elongation is as follows:
PSB830, yield strength 830MPA, tensile strength 1030MPA, elongates after fracture 6%
PSB930, yield strength 930MPA, tensile strength 1080MPA, elongates after fracture 6%
PSB1080, yield strength 1080MPA, tensile strength 1230MPA, elongates after fracture 6%
There are no ribs on the threaded bar which means the hex nut or coupler can be used at any point.
We also serve corrosion protection like zinc galvanized and epoxy coating.
PSB930 hot rolled bridge reinforcement PT bar
Finish rolled thread steel nut. It is an important part of anchor for finish rolled thread steel fittings. The finished threaded steel nut (YJM nut) is a flat nut (top nut) . Cone Nut (lower nut). Flat nuts are commonly used for fixing ends. Taper nuts are commonly used in tension ends. Commonly used specifications are divided into 20 mm, 25 mm, 32 mm, 36 mm, 40 mm, commonly used materials are divided into 45 # . 40 CR materials. Hardness values range from 22 to 33. Product name: High Strength Finish rolled rebar product category: Bar Product Brand: HRB 500. PSB 785. PSB 830. PSB930 product specification: 15-32 Implementation Standard: GB / T20065-2016 or technical agreement main use: continuous beam of large bridge and hanging basket in bridge and high slope. A hydroelectric dam. Anchorage of Nuclear Power Station and other engineering works
Thread Steel Enlarge Anchoring End Head| Intensity level | Yield Strength / MPA | Tensile strength / MPA | Percentage elongation at break /% |
| PSB500 | ≥500 | ≥630 | ≥10 |
| PSB785 | ≥785 | ≥980 | ≥7 |
| PSB830 | ≥830 | ≥1030 | ≥6 |
| PSB930 | ≥930 | ≥1080 | ≥6 |
| PSB1080 | ≥1080 | ≥1230 | ≥6 |
){kind=link}